The system composing of 2 engines, which are car and motorcycle  plate detection engines and car plate recognition engine to translate from image to text data, which also can provide the car brand and colors of the car.


Software Specification

  • Use Video Loop Detector to detect license plates. No coil or sensor needed to detect the car.
  • Automobile license plate detection which do not catch people or animals.
  • 95% accuracy for numbers and letters on labels.
  • 50% accuracy for car brand detection. (customization required for new market)
  • 50% accuracy for vehicle color depends on lighting conditions.
  • The system supports speeds of up to 180 km/hr. It depends on the camera used.
  • Can be used as a mobile license plate reader on the Mobile Patrol Car.
  • VIP Alert, Member, Blacklist
  • Automatically announcement car registration as Blacklist/VIP alerts with Text to Voice technology.
  • Real Time Synchronize with external database. To connect with the central software
  • Supports SQL database, MySQL, Oracle


Features of Camera Detection

  • High resolution Network Camera, The license plate is more accurate (** Recommended resolution of the license plate is 150-300 pixels).
  • A camera that can change the distance of the lens. To get the desired image range. The size of the lens is about 12-40 mm or 8-50 mm.
  • Low pass filter technology for bright lighting (Headlights) to get a clear picture.
  • Infrared For night vision
  • The camera supports IP66-rated base when used outdoors.


There are two types of car registration.

  • Parking license plate system in the parking lot. Entrance – Exit the building. The characteristics of the vehicle will run at relatively low speed. The speed of the car up to 60 km/hr. The camera should be a lens that can change the size of about 4-18 mm.
  • High Way Road Vehicle Registration System The characteristics of the vehicle that will be detected will run at relatively high speed. Introducing a camera designed specifically for license plates. And can change the lens. The lens should be approximately 12-40 mm or 8-50 mm.


Equipment required for installation

  • Infrared illumination kit (in low light areas and night vision)
  • IP Network Camera and Housing
  • Specially-formulated PC processor, Core i7 Gen7 3.0GHz or higher, 8GB RAM, 500GB SSD
  • Power Supplies for Local Devices
  • Network Switch
  • Webserver Kit (for central administration)
  • ADSL Router (if you want to link and view data centrally)


License Plate Recognition


Centralized Management License Plate Recognition Diagram

ระบบตรวจจับและอ่านป้ายทะเบียนรถยนต์แบบอัตโนมัติ (License Plate Recognition)


The central control system has a central Web server that collects information from the camera’s installation site. It can display information on devices such as computers, tablets, and mobile phones.

** If you want to do Web Server for Access, central information. There will be a cost to install the CMS Software.


Restrictions of LPR system

  • View and position of the camera. Must be tested before actual installation. For the most accurate and accurate results.
  • The license plate that the camera can handle should be sharp, ranging from 150-300 pixels, to provide accurate and accurate information.
  • If you want to capture the red license plate. And the license plate is a graphic card. Set the camera to a black-and-white Night Mode by using the Infrared Illuminator to capture the license plate of the type clearly.
  • The license plate is damaged or unclear. Apart from the Department of Land Transport. This may reduce the accuracy of the data.


Samples of software work


Preview of the program while running.

Preview of the program while running (Live view)


Preview of the program while running (Live view)